Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Sacramento Owner’s Guide
If you have a CWS driveway or paver system and a section is sinking, cracking, or pulling apart at the edges, we stock the replacement pavers, edge restraints, base materials, and joint sand you need in Sacramento. A typical CWS paver repair or partial replacement runs $700 – $4,500 depending on how many square feet failed and what’s happening underneath. Most owners catch the problem after winter rains, when a low spot holds water or a paver rocks underfoot. Here’s everything we see on CWS jobs in Sacramento, what the parts actually cost, and how to match what you have so the repair doesn’t look like a patch.
Key takeaways:
- CWS paver colors and surface textures vary by production run; a replacement needs the lot number or a physical sample, not just a color name.
- Most CWS driveway failures are base problems, not paver problems. The paver cracks because the soil beneath it moved.
- We carry CWS-compatible joint sand, edge restraints, and base rock on the truck for Sacramento repairs, and can order exact-match pavers when needed.
- PenHallow Remodeling Sacramento is an independent contractor. We’re not affiliated with CWS, but we work with their systems every week.
Which CWS Models This Applies To
CWS (Concrete Wall Systems / Concrete Works Systems, depending on the era) produces pavers in a few distinct series that show up across Sacramento driveways. The most common we see are their tumbled pavers, beveled-edge pavers, and larger-format slab pavers in 60mm and 80mm thicknesses. The 60mm paver is spec’d for patios and walkways; the 80mm is what a driveway should have in Sacramento because of the clay soil and wet winters.
The compatibility gotcha owners hit: CWS changed some color blends and surface finishes over the years, and a paver bought today won’t always match the color of a paver installed in 2012, even with the same product name. UV fading does its own work on top of that. If you don’t have a leftover paver in the garage, take a clear photo of a clean paver and measure its exact dimensions before calling. That saves a second trip. For most CWS lines, we source exact-match pavers through our supply network in the Sacramento area; for small patches where an exact match isn’t available, we can pull pavers from a less visible section and install new ones there instead. It’s a trick that keeps the repair looking right.
Styles & brands we work with
Signs Your CWS Driveway & Pavers Is Failing
- A paver rocks or pops when you step on it. Usually the bedding sand under that one paver has washed out or settled. It’s an early warning; left alone, the paver next to it starts moving too.
- A low spot holds water after rain. Sacramento’s wet winters plus clay soil that expands and shrinks is a recipe for base settlement. Water pooling means the base under the pavers has dipped and the problem will spread along that drainage path.
- Edge restraints are poking up or the border pavers have drifted outward. The edge restraint is the plastic or aluminum strip that locks the paver field together. When it fails, the whole edge of the driveway starts walking outward under tire pressure.
- Joint sand is gone and weeds are coming through. Joint sand locks the pavers together so they share load. When it washes out, pavers start grinding against each other and chipping.
- A paver or group of pavers cracked clean through. That’s load stress, almost always from a base that stopped supporting the paver underneath. Replacing the paver without fixing the base means the new one cracks within a season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what CWS driveway and paver repair work costs in Sacramento, installed:
- Patching a small sunken section (up to 30 sq ft): $700 – $1,400
- Edge restraint replacement along a 20-ft run with sand reset: $400 – $900
- Mid-size paver re-level and re-sand (100 – 200 sq ft): $1,800 – $3,500
- Full driveway base rebuild with existing pavers reinstalled: $4,000 – $9,000
- New CWS paver driveway with proper base (full install): $7,000 – $18,000
What drives the number up or down: how much base rock has to come out and go back in, whether the edge restraints need replacing, how far we have to haul materials, and whether your exact CWS paver is still in production or we need to match it carefully. Every quote from us is a written number before we start. Nothing changes at the door. Trevor Nash prices CWS repairs the way he prices kitchens and baths: straight the first time, with the parts, labor, and haul-away spelled out on paper.
DIY or Call Us?
You can safely check a few things yourself. Walk the driveway after a rain and mark the low spots with chalk. Look at the edges: are the plastic restraints visible or curled? Clear a section of joint sand and see if the pavers are chipped along the edges. That gives us useful information before we even arrive.
What we don’t recommend is pulling up a CWS section and resetting it yourself, especially on a driveway. Paving work is not high-tension dangerous the way a garage door spring is, but lifting four-square-foot slab pavers and compacting base rock properly is hard on your back and easy to get wrong. A driveway repair that isn’t compacted right will settle again in the next rainy season and you’ll be paying for the same square footage twice. If you’re in Sacramento and want an honest read on whether it’s a patch or a rebuild, call us at (279) 300-1177 and we’ll come look.
FAQs
A properly installed CWS paver driveway lasts 25 – 40 years in the Sacramento climate if the base was done right and the joint sand is topped up as needed. The pavers themselves are extremely durable; it’s the base and the edges that age first. If your driveway is 10 – 15 years old and failing, it’s almost never the paver wearing out. Call (279) 300-1177 and we’ll tell you if it’s worth patching or time to rebuild.
No, a cracked paver needs replacement. You can’t glue a paver back together in a way that holds up to driveway traffic. The good news is a cracked paver is usually $8 – $40 in material; the repair cost is mostly labor and base correction. We stock common CWS sizes in our Sacramento shop and order exact matches when needed.
Most small-to-mid CWS repairs in Sacramento are done in one day. That includes cutting out the failed section, correcting the base, reinstalling the pavers, and adding fresh joint sand. A full driveway base rebuild runs 2 to 3 days depending on access and weather. We’ll give you the window before we start, in writing.
We stock CWS-compatible edge restraints, joint sand, and base rock, and we can source exact-match CWS pavers through our Sacramento suppliers. We also work with parts for KraftMaid, Cambria, and Silestone when a larger exterior-to-interior project is in play. You don’t have to track anything down yourself. Tell me what you want the room to feel like, and I’ll tell you what it actually takes to get there. Call (279) 300-1177 and we’ll take it from the driveway to the front door.
Written by Trevor Nash, Owner, Penhallow Remodeling Sacramento at Penhallow Remodeling Sacramento, serving Sacramento and nearby areas.
