







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Sacramento Owner’s Guide
We install and repair ActiveYards aluminum and vinyl fence systems throughout Sacramento, with most full installations landing between $3,500 and $9,000 depending on linear footage, gate hardware, and whether we’re pulling old fence or starting from bare ground. The typical call starts with a gate that drags, a post that leans, or a section that blew loose in a winter windstorm off the Delta. You’ve got an ActiveYards product because it was sold as low-maintenance and built to last. Most of the time it does. But the hardware and the post settings fail long before the panels do, and that’s where we come in.
We carry ActiveYards-compatible brackets, post caps, gate hinges, and latch assemblies on the truck. If your fence is a newer ActiveYards line, we can match the original profile and color. If it’s an older or discontinued series, we’ll tell you straight whether a quality aftermarket part makes more sense than chasing an OEM piece that costs triple and ships from the East Coast.
Which ActiveYards Models This Applies To

ActiveYards has sold under several series names over the years: the aluminum residential lines like Brookhaven, Chestnut, and Hartford, plus vinyl systems marketed through dealers and big-box stores. Identifying your series matters less than you might think. The more useful piece of information is the panel style: flat-top, spear-top, or privacy. We also need the post size, which is usually 2″ or 2.5″ square on most ActiveYards builds in the Sacramento area.
Here’s a gotcha we see weekly: ActiveYards changed the internal bracket design between older and newer production runs. The new panels don’t always seat into old posts without a retrofit bracket, and the old panels can rattle inside new posts. If you’re replacing one section rather than the whole run, measure the panel width between posts and snap a photo of the bracket from underneath. That photo saves us a trip and saves you a service call.
One more thing about OEM versus aftermarket for ActiveYards specifically. The OEM hardware is fine. The aftermarket stainless brackets from two or three known suppliers are often better, especially in Sacramento where summer heat and irrigation overspray corrode powder-coated steel faster than the manufacturer’s testing suggests. We stock both and explain the difference before we quote.
Styles & brands we work with






Signs Your ActiveYards Fence Installation Is Failing
- The gate drags or won’t latch: This is the most common ActiveYards failure in Sacramento. The post shifts, the hinge plate bends, or the latch striker doesn’t align. Tightening rarely fixes it; the post usually needs to come out and be reset in fresh concrete.
- A panel rattles in high wind: ActiveYards panels are light, and if the bracket screws strip or the post flexes, the section chatters. You’re hearing metal fatigue starting. Left alone, it becomes a torn-out screw hole and a dangling panel.
- A post is out of plumb (leaning): Sacramento clay soil expands and contracts with the seasons, and shallow post holes move. ActiveYards posts set with too little concrete or no gravel base are the ones that lean first, usually at the gate post where the load is highest.
- White residue or flaking at the base of a post: That’s oxidation from irrigation water or fertilizer contact. Aluminum doesn’t red-rust, but the powder coat breaks down and the metal underneath pits. In a few years the post wall thins enough to snap at the ground line.
- The top rail pulled out of a post cap: This usually follows freeze-thaw cycles or a dog pushing against the fence. The fix is a new rail bracket and often a shim, but if the cap is cracked, it’s a replacement part we keep in stock.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

ActiveYards fence installation in Sacramento runs $3,500 to $9,000 for most residential jobs. A single gate replacement with new hardware and a reset post typically falls around $1,200 to $1,800. Replacing one damaged panel and two posts runs $800 to $1,500. What drives the bigger numbers is linear footage, how much old fence we’re hauling away, and access: if the fence line is tight against a retaining wall or mature landscaping, the labor climbs.
Our quote is written, not spoken. You’ll see the panel or hardware cost, the concrete, the labor, and the dump fee as separate lines. The price on the quote is the price on the invoice. And every ActiveYards installation or repair carries our 365-Day Done Right Promise: if something we touched fails inside a year, we come back and fix it at no charge. That’s in writing, every job, no asterisk.
DIY or Call Us?
You can safely handle a few things yourself: tightening hinge screws, adjusting a latch, hosing off the rails. No special tools, no real risk. What you should not do is pull a leaning post or reset a gate without knowing what’s underground. Sacramento has irrigation lines, low-voltage lighting wires, and old clay drain pipes located exactly where you’d want to dig a post hole.
The other DIY trap is mixing your own concrete and setting the post too shallow. Sacramento’s winter ground movement needs a post hole that’s deeper than the plan. If the new post shifts in the spring, you’re redoing the job we could have done once. That’s not a scare tactic; it’s the math. Call us at (279) 300-1177 and we’ll give you a written number before any work starts.
FAQs

Expect 15 to 20 years from the panels and 10 to 15 from the posts and hardware in Sacramento conditions, with gate hardware usually failing first because it carries the live load. Irrigation overspray and clay soil movement shorten post life; panels in shaded, dry sections often outlast everything else.
We repair single sections and individual posts all the time. Match the panel style and post size, and we’ll quote the section, the concrete work, and the hardware as one written line-item price. Call (279) 300-1177 for an exact number.
A full residential install in Sacramento usually runs 1 to 3 working days. Single gate or panel repairs are done in a day. Weather and concrete cure time can add a day, and we’ll tell you that before we start, not after.
We keep common brackets, post caps, hinges, latch assemblies, and gate hardware on the truck in standard finishes. Unusual colors or discontinued series parts we source same-week, and we tell you the shipping reality before you commit to the repair.
If your ActiveYards fence needs work in Sacramento, call (279) 300-1177 for a free estimate. You’ll get a straight answer, a written price, and a guarantee that actually says what it covers.
Written by Trevor Nash, Owner, Penhallow Remodeling Sacramento at Penhallow Remodeling Sacramento, serving Sacramento and nearby areas.


