Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Sacramento Owner’s Guide
Unilock fence installation in Sacramento typically runs $3,500 – $9,000 installed, depending on linear footage, site prep, and whether we’re replacing posts, panels, or a full run. We stock Unilock-compatible fence components on our trucks and can usually schedule your install within a week, not a month. Most Sacramento homeowners call us after a winter storm knocked a section loose, or because the original install was done on a shallow footing and the whole run is now leaning toward the neighbor’s yard.
Trevor Nash has seen plenty of Unilock fence jobs across Sacramento that failed long before they should have. The failure usually isn’t the Unilock product itself. It’s the install: posts set in too little concrete, no gravel base under the post, or panel clips forced into place instead of seated. We fix the install, not just the symptom.
Key takeaways:
- Unilock fence installation in Sacramento: $3,500 – $9,000, written price before work starts
- We stock Unilock-compatible posts, panels, and clips on the truck for most service calls
- 365-Day Done Right Promise: if it fails inside a year, we come back and fix it free
- Penhallow Remodeling Sacramento is an independent service provider, not affiliated with Unilock
Which Unilock Models This Applies To
Unilock makes fence products under a few distinct lines, and the part compatibility is not as forgiving as some owners assume. The Brussels Dimensional System, the Estate Wall, and the Pisa II all use different post dimensions and panel lock sets. A clip that clicks into a Brussels post will not seat in a Pisa II post, and forcing it is how post channels get cracked.
Here’s what to check before calling: look at the back face of any panel. Unilock stamps the series name and often a mold date. If the stamp is worn off, measure the post. Brussels posts run a 4-inch by 4-inch profile with a single vertical channel. Pisa II posts are wider, with a twin-channel design. If you’ve got a fence that’s been up for more than eight years through Sacramento summers, expect some UV fade that makes the stamp hard to read. Send us a photo and we’ll identify it before we roll a truck.
On OEM versus aftermarket: Unilock’s own replacement parts carry a color-matched guarantee we can’t get from generic equivalents. For structural posts and load-bearing clips, we recommend OEM every time. For non-visible filler strips and base shims, a quality aftermarket part saves you money without changing the look. We’ll walk you through which is which before you pay for anything.
Styles & brands we work with
Signs Your Unilock Fence Installation Is Failing
- Panels shift in high wind. The clips have lost tension or the panel tabs are worn. Sacramento’s valley winds in the Delta breeze season put constant lateral stress on panel connections. A fence that rattles is a fence working its own clips loose.
- Post lean, especially after rain. Sacramento’s clay-heavy soil expands when wet and shrinks when dry. A post set on a 6-inch footing will heave and lean within two winters. We see this all over East Sacramento and Land Park.
- Visible gaps between panels and posts. This usually means a clip snapped, not that the panel shrank. A broken clip in one section puts extra load on the adjacent clips, and failure spreads down the line.
- White stress marks or hairline cracks at the post base. Concrete posts absorb moisture and crack under freeze-thaw cycles. Sacramento doesn’t get many hard freezes, but older posts from the 2000s era have thinner walls and fail earlier than current production.
- Fence smells damp or shows efflorescence. That white chalky bloom means water is sitting inside the post core. If the post wasn’t backfilled with drainage gravel at install, trapped water weakens the wall over years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Unilock fence installation in Sacramento runs $3,500 – $9,000 for a typical residential run. A partial repair, like replacing four posts and six panels, might land at $1,800 – $3,200. A full perimeter install with 40 or more linear feet, gate hardware, and site grading can push past $9,000 honestly, and we’ll tell you that before we dig.
What drives the price: linear footage first, then footing depth. Sacramento required setbacks and wind exposure in neighborhoods like Natomas and Pocket mean deeper footings than a lot of original installs ever got. Access matters too. If we’re hauling posts and panels through a side gate instead of a front driveway, that’s labor time we price in writing up front.
Every quote includes parts, labor, demolition and haul-away of the old fence, and a written 365-Day Done Right Promise. The number we hand you is the number on the invoice. If something fails inside the guarantee period, our crew comes back and fixes it at no charge. Background-checked, uniformed technicians do the work, and a live person answers the phone when you call.
DIY or Call Us?
You can safely check a few things yourself: look for cracked clips, take photos of the post stamps, and note which sections move when you push on them. That’s real diagnostic time and it helps us price the job faster. What we don’t recommend is digging out a concrete Unilock post on your own. A leaning post can weigh 80 to 150 pounds, and when the footing finally lets go, it releases all at once. We’ve repaired fences in Midtown and Curtis Park where a homeowner got hurt trying to shim a post. Not worth it.
If the failure is a single broken clip on an otherwise square fence, a handy owner with the right replacement part can do that repair in ten minutes. If the post is leaning, the panels are cracked, or the gate no longer closes, call us at (279) 300-1177. Trevor will give you a straight answer about what it takes and what it costs.
FAQs
A properly installed Unilock fence in Sacramento lasts 20 to 30 years, while a shallow-footing original install commonly fails in 8 to 12. The concrete posts and panels themselves hold up well to our climate, but the footing is the weak link in most Sacramento installations. Call (279) 300-1177 if you’re not sure which kind you have.
Yes, most partial failures like broken clips, cracked single panels, or a single leaning post can be repaired without replacing the full run. We’ll tell you honestly when a full replacement is cheaper over time than chasing repairs on an install that was done wrong from the start. Estimates are free, so it costs nothing to find out.
A partial repair usually takes one day. A full fence installation on an average Sacramento lot takes two to three days including demolition, footing prep, panel setting, and clean-up. We give you an arrival window in writing before the job starts.
We carry common Unilock-compatible clips, shims, and post caps on the truck, and our Sacramento supplier stocks panels and posts locally. Specialty colors from the Pisa II line sometimes run a seven to ten day order time. We’ll tell you which applies before you commit. We also regularly work with other brands homeowners ask about, including KraftMaid, Cambria, and Silestone for interior projects.
If you’ve got a Unilock fence that’s leaning, rattling, or missing a panel, call (279) 300-1177 to schedule your free estimate. We’ll put a written price in your hand before any work starts, and we’ll stand behind the job with our 365-Day Done Right Promise. Tell us what the fence looked like the day it went in, and we’ll tell you what it actually takes to make it right.
Written by Trevor Nash, Owner, Penhallow Remodeling Sacramento at Penhallow Remodeling Sacramento, serving Sacramento and nearby areas.
