Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Sacramento Owner’s Guide
We stock and install Cambridge Pavers-compatible driveway and paver systems throughout Sacramento, and a full paver driveway installation here typically runs $7,000 to $18,000 depending on square footage, base condition, and the specific Cambridge line you’re matching. Most homeowners discover they have a problem the same way: a paver shifts underfoot after a rainstorm, a low spot pools water against the garage slab, or the sand between joints washes out faster than it used to. The good news is that Cambridge pavers are modular – you rarely have to tear out the whole driveway to fix what’s failing.
This page tells you exactly what we see in Sacramento driveways, what it costs to make it right, and when a repair beats a replacement. Trevor Nash has been pricing paver work in this market long enough to know that the number you get on day one should be the number on the invoice.
Which Cambridge Pavers Models This Applies To
Cambridge Pavingstones makes three main paver families that show up in Sacramento driveways: the Ledgestone series (flagstone-textured, 2-3/8″ thick), the Sherwood series (tumbled, old-world look), and the Cambridge Classic series (smooth, dimensional). Each has different joint spacing needs and base tolerances, so matching the right paver matters more than most people expect.
Here is the compatibility gotcha we run into constantly: Cambridge pavers are calibrated differently from Belgard or Unilock. A Cambridge 6×9 paver is not a true 6×9 – it runs about 1/16″ under nominal so the joints lay clean with Cambridge’s proprietary spacer lugs. If you mix a big-box paver into a Cambridge field, the lines drift and you’ll see it from the curb within a year. For a visible driveway repair, we always source the actual Cambridge line or a dimensionally matched equivalent. Penhallow Remodeling Sacramento is an independent service provider, not affiliated with Cambridge Pavers, but we work with their product lines regularly alongside Belgard and Unilock.
To identify your paver, flip one over. Cambridge pavers have a series name stamped near the edge or a raised diamond pattern. If you can’t read it, bring one to our shop or text a photo to (279) 300-1177 and we’ll ID it before you spend a dime.
Styles & brands we work with
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- A paver or cluster of pavers rocks underfoot. This means the sand bedding layer has washed out beneath the paver, usually from a low spot where water channels through. In Sacramento’s clay-heavy soil, winter rain plus summer shrink-swell cycles accelerate this faster than in coastal areas.
- Sand is everywhere after rain. If joints keep emptying after storms, the edge restraint is likely failing and the sand is literally washing down your driveway slope. The fix is re-sanding with polymeric sand and repairing or adding edge restraint, not just sweeping in more sand.
- A visible dip or birdbath holds water for hours. This points to base failure underneath, not just surface issues. Sacramento’s expansive clay moves seasonally, and a base that was never compacted to spec will settle within two to five years.
- Cracks run through multiple pavers in a line. A straight-line crack usually traces a tree root pushing up, or a utility trench that was backfilled without proper compaction. Individual pavers crack from point pressure, but linear patterns mean something is moving underneath.
- Weed growth through joints despite weed barrier. This tells us the bedding sand has organic material mixed in or the barrier was never installed. Pavers themselves don’t grow weeds – the joints do, and Sacramento’s warm springs make it worse if the sand base was contaminated.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Cambridge Pavers driveway work in Sacramento, here is what we quote:
- Full paver driveway installation (Cambridge Ledgestone or Sherwood): $7,000 – $18,000, driven primarily by square footage, access, and whether we’re rebuilding the aggregate base or laying over a sound existing slab.
- Partial paver repair (up to 200 sq ft, including new sand and edge restraint): $1,200 – $3,500.
- Single paver or small cluster replacement: $150 – $500 including material match and re-sanding.
- Re-sanding existing driveway with polymeric sand: $400 – $1,200 depending on square footage and joint condition.
Every number includes labor, materials, haul-away of old pavers if needed, and a written line-item price before we start. We do not hand you a range and hope you don’t notice the change order later. The price we give you on day one is the price on the invoice. Every job carries our 365-Day Done Right Promise in writing: if the paver work fails inside a year, we come back and fix it at no charge. No service call fee, no re-inspection fee.
What drives the cost up: poor access for equipment, existing base failure that requires excavation beyond 8 inches, a steep slope that needs additional edge restraint, or a paver pattern that requires significant cutting (herringbone eats blade time). What brings it down: a sound existing base we can re-use, a simple running bond pattern, and good truck access.
DIY or Call Us?
You can safely re-sand joints yourself if the pavers are still flat and the edge restraint is intact. Sweep in polymeric sand, mist it lightly, and let it set. But if pavers are rocking, dipping, or cracking in a line, the problem is underneath the surface – and that means pulling up the affected area, checking the base, compacting it correctly, and re-laying the pavers to grade. Get it wrong and you’ll be redoing the same repair in twelve months when the first Sacramento rain finds the low spot again.
Paver work is not dangerous in the way a garage spring is, but it is heavy, dusty, and unforgiving about shortcuts. If the joint lines are drifting or a section has settled more than an inch, call (279) 300-1177 and we’ll price the repair the same day. A live person answers, not a voicemail maze.
FAQs
A properly installed Cambridge paver driveway lasts 25 to 40 years in Sacramento with periodic re-sanding every 3 to 5 years. The pavers themselves don’t wear out from traffic – most failures come from base settlement, tree roots, or water intrusion. Call (279) 300-1177 if you’re re-sanding more often than every couple of years; that signals a base or drainage issue.
Yes, in most cases a failed section can be pulled, the base re-compacted, and the same pavers re-laid if they’re not cracked through. We repair sections down to the aggregate base rather than replacing whole driveways whenever the surrounding pavers are still sound. For an exact assessment, call (279) 300-1177 – estimates are free.
A partial repair takes one day, including excavation, base prep, paver re-laying, and re-sanding. A full driveway installation runs 3 to 7 days depending on access, pattern complexity, and weather. We give you a written arrival window before work starts and we show up in it.
We stock the most common Cambridge lines in Sacramento – Ledgestone, Sherwood, and Classic – and we’ll match your existing paver before we quote the repair. If your series is discontinued or specialty-colored, we source a dimensionally matched current line and show you the match before we lay it. Call (279) 300-1177 with your paver’s series name and we’ll confirm stock same day.
Written by Trevor Nash, Owner, Penhallow Remodeling Sacramento at Penhallow Remodeling Sacramento, serving Sacramento and nearby areas.
