Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Sacramento?
Aluminum fence installation in Sacramento typically costs $4,000 to $10,000 for an average residential project, with most homeowners spending around $6,500 to $7,000 for roughly 150 to 200 linear feet of fence. The final number depends on the style you choose, how much of the old fence needs to be pulled out, and whether your property sits on flat ground or a sloped section. We’ll walk through exactly what drives these costs below, so you can compare bids with confidence.
If you want a written number for your specific yard, call (279) 300-1177 and we’ll come out, measure, and hand you a price in writing before any work starts.
Key Takeaways
- Sacramento aluminum fence projects typically run $4,000 – $10,000, with $27 – $38 per linear foot installed being a realistic mid-range benchmark.
- The biggest cost drivers are linear footage, fence height, gate count, and whether removal of an old fence is included.
- Aluminum holds up better than steel in Sacramento’s dry climate; it doesn’t rust the way uncoated steel does.
- Expect to pay around $150 – $300 per foot for walk gates, and $500 – $1,400 for drive gates, including hardware.
- Free estimates are standard on this kind of work. We’ll give you a written price before you sign anything.
Aluminum Fence Installation Cost Breakdown (2026)
Here’s a line-by-line look at what a typical aluminum fence project costs in the greater Sacramento area. These numbers reflect what we’re seeing in neighborhoods like East Sacramento, Natomas, Elk Grove, and Roseville in 2026.
| Project Component | Typical Cost Range | Notes |
|---|---|---|
| Aluminum fence material (residential grade) | $18 – $32 per linear foot | Basic 4-ft panel styles on the lower end; decorative or 6-ft privacy-height panels on the higher end. |
| Aluminum fence material (premium/ornamental) | $35 – $55 per linear foot | Decorative picket caps, arched gates, or custom colors. |
| Labor and installation | $10 – $18 per linear foot | Includes post hole drilling, concrete setting, panel hanging, and hardware. |
| Gate installation (walk gate) | $300 – $900 per gate | Includes latch, hinges, and any post reinforcement. |
| Gate installation (single drive gate) | $800 – $1,800 per gate | Wider posts and heavier frame needed for vehicle clearance. |
| Old fence removal and disposal | $3 – $7 per linear foot | Varies by material; chain link is easier than rotted wood. |
| Concrete curb or wall footings | $10 – $25 per linear foot | Only if you’re running fence along hardscape. |
| Full project (150 – 200 linear feet, 1 gate) | $4,000 – $10,000 | Most common Sacramento-area scope. |
Where the money actually goes: material is usually 45 – 55% of the project, labor and post setting make up roughly 40 – 50%, and permits or disposal eat up the remainder. A straight 4-foot aluminum fence with one walk gate on flat ground will sit at the low end. Add a driveway gate, remove 200 feet of rotted wood fencing, and run the line across a sloped side yard, and you’ll move toward $9,000 – $10,000 quickly.
One thing we tell every homeowner in Sacramento: aluminum fencing is priced differently from vinyl or wood because the material itself costs more per foot, but installation is often faster. Panels come pre-assembled in 6-foot or 8-foot sections, so a crew can set posts and hang panels in a day or two on most residential lots.
What Affects Aluminum Fence Installation Pricing in Sacramento
Sacramento’s specific soil, weather, and lot layouts play a real role in what you’ll pay. Here are the factors that move the number on your quote.
- Linear footage. This is the obvious one. More fence, more material, more post holes. But per-foot pricing often drops slightly on longer runs because the crew is already mobilized with tools and materials.
- Slope and grade. In parts of Folsom and El Dorado Hills, sloped yards require stepped or racked panels, which means more cutting and custom post spacing. Flat lots in Natomas or Land Park install faster and cost less per foot.
- Old fence removal. Tearing out a 6-foot redwood fence with concrete footings is more labor than yanking a chain link fence. Disposal fees at Sacramento County transfer stations also factor in.
- Gate count and gate type. Every gate adds structure. Drive gates are the biggest single add-on because they need heavier posts, reinforced hardware, and sometimes a steel frame inside the aluminum.
- Panel height and style. A 4-foot residential picket panel is the cheapest. Going to 5 or 6 feet means more metal, bigger posts, and sometimes a wider post footing to handle the wind load.
- Permit requirements. Most aluminum fences in Sacramento don’t require a building permit if they’re under 7 feet tall and not acting as a pool barrier. But if your fence doubles as a pool enclosure, Sacramento County enforces specific height and self-latching gate rules, which can push material and hardware costs up.
Here’s a local detail most fence contractors won’t tell you: Sacramento’s soil is largely clay-heavy. That’s not a problem for aluminum fencing, but it means post holes need to be dug to the right depth and set with concrete, or you’ll get heaving after a few winters. We set aluminum fence posts in concrete at a minimum depth of 24 inches in this area. Some companies stop at 18, and you’ll see the result within two years when a gate starts binding or a panel leans at the top. On our Aluminum Fence Installation in Sacramento page, we walk through the full installation process we use, step by step.
Aluminum vs. Other Fence Materials in Sacramento
If you’re weighing aluminum against other options, here’s how the numbers compare for a standard 150-foot run in 2026.
- Aluminum: $4,000 – $10,000. Rust-resistant, lightweight, limited color range, holds up in Sacramento’s dry summers.
- Vinyl Fence Installation: $3,500 – $9,000. Solid privacy, lower material cost, but panels can flex and warp in triple-digit heat.
- Wrought iron or steel: $6,000 – $15,000. Strong and traditional, but requires periodic sanding and repainting in Sacramento’s dry, dusty conditions.
- Wood (cedar or redwood): $3,000 – $8,000. Cheapest upfront, but needs sealing every 2 – 3 years and will eventually rot at ground contact.
Aluminum sits in a sweet spot for Sacramento homeowners who want the look of wrought iron without the rust and repainting cycle. It’s the fence we suggest most often when someone wants a low-maintenance perimeter that still looks deliberate.
Is Aluminum Fence Installation Worth It in Sacramento?
If you’re planning to stay in your home for five years or more, yes. Here’s what you get for the money.
Aluminum doesn’t rust. That’s not a minor point in Sacramento, where nine months of the year are dry and the remaining three bring rain that sends uncoated steel into a slow corrosion cycle. Aluminum’s powder coating is baked on, not sprayed, so it doesn’t chip the way paint does. We’ve seen 15-year-old aluminum fences in Curtis Park that look nearly new with a rinse from a garden hose.
You also avoid the maintenance tax of wood. No staining, no sealer, no board replacement. Your cost over a decade is the install price plus maybe one hinge tightening. Compare that to a wood fence you’ll pay for twice by year 10.
That said, aluminum is not a privacy fence. Even the tallest residential panels leave gaps between pickets. If privacy is your primary goal, vinyl or wood is the better call. If you want boundary definition that matches a craftsman or mid-century home and doesn’t start failing after five years, aluminum is hard to beat.
How to Save on Aluminum Fence Installation
There are legitimate ways to bring the number down without cutting quality. Here’s what we tell people sitting across the table.
- Remove the old fence yourself. If you’re comfortable hauling rotted boards and cutting post concrete, you can save $500 – $1,000 on a typical Sacramento lot. Most cities will let you put a reasonable amount of fence debris in your weekly green waste bin over a few weeks.
- Keep gates to a minimum. Every walk gate adds $300 – $900. Every drive gate adds more. Ask yourself if you really need that third gate behind the side yard.
- Choose a standard panel height and style. 4-foot residential picket panels are stock items. Custom heights or premium ornamental styles require special ordering and sometimes longer lead times.
- Install in the off-season. Fence work in Sacramento slows down in late fall and winter. Contractors are more likely to work with you on pricing for a January install than a May one.
- Get a written line-item quote. You want to see material, labor, gate charges, and disposal broken out separately. If a quote shows one lump number, you can’t compare it against another bid. We give every homeowner a written, line-itemed price before they hire us. No verbal ballparks.
Call (279) 300-1177 for a free estimate that includes a written, line-itemed price. The number we hand you is the number on the invoice.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per foot in Sacramento?
Expect to pay $27 – $38 per linear foot installed for a standard residential aluminum fence in 2026. That includes material, labor, concrete post footings, and hardware. Premium ornamental styles or 6-foot panels can run $42 – $58 per foot. For an exact per-foot price on your layout, call (279) 300-1177 and we’ll measure it for free.
Is aluminum fence more expensive than vinyl fence?
Yes, typically about 15 – 20% more per linear foot installed. A 150-foot vinyl fence in Sacramento runs $3,500 – $9,000, while the equivalent aluminum project is $4,000 – $10,000. The gap narrows if you want privacy-height fencing, but aluminum’s material cost is inherently higher. It lasts longer, though, which is why many homeowners choose it.
How long does aluminum fence installation take in Sacramento?
Most residential projects wrap up in 1 to 3 days. A standard 150 – 200 foot run with one gate is usually a two-day job: day one for post holes and concrete, day two for panels and gates. Larger properties with multiple gates or sloped sections can run 3 to 5 days. We give every homeowner a defined arrival window before work starts.
Do I need a permit for an aluminum fence in Sacramento?
For most residential fences under 7 feet tall, no permit is required in Sacramento city or unincorporated Sacramento County as long as the fence isn’t enclosing a pool. Pool barrier fences have specific height, spacing, and self-latching requirements, and those do need inspection. We’ll confirm the permitting picture on your property before we quote.
Can you install an aluminum fence in the winter?
Yes. Concrete sets in cold weather, just slower. In Sacramento’s mild winters, post footings usually cure within 24 to 48 hours, which is only slightly longer than summer. Scheduling a winter install can also save you money on labor since it’s the slower season for fence crews. Call (279) 300-1177 for a free, no-obligation quote any time of year.
Why Sacramento Homeowners Trust Penhallow Remodeling With Aluminum Fence Work
Trevor Nash leads our Sacramento team, and the way we price fence work is the way Trevor has always run projects: the number goes on paper before the work starts. No tightening after the posts are in the ground, no surprise “while we’re here” add-ons. We operate under The Kingswell Way, in place since 2004, which puts three things in writing on every project: a set price, a defined arrival window, and a clean job site when we leave.
Every technician who shows up at your door is background-checked and in uniform. You know the name of the person walking onto your property, and that person knows the price on your quote. If something isn’t done right, our 365-Day Done Right Promise covers it in writing: we come back and make it right at no charge. If a repair on our work fails inside the guarantee period, the second visit is free, too.
We don’t use an answering service. A live person answers the phone 24/7 at (279) 300-1177, which matters if you’re calling at 7 a.m. on a Saturday because a gate isn’t latching and the dog figured it out.
This isn’t side work for us. Fence installation, remodeling, and the trades that go with them are what we do every day. You can read more about our full approach on our home page.
Get a Written Price on Your Sacramento Aluminum Fence
The quickest way to know what your fence will cost is to call (279) 300-1177 and schedule a free estimate. We’ll measure the run, talk through panel styles and gate options, and hand you a written price you can hold us to. No deposit games, no high-pressure closing. The number you see is the number you pay, and it’s backed by a 365-day written promise that if it’s not done right, we make it right.
Pricing reflects the Sacramento market as of 2026. Penhallow Remodeling Sacramento offers free estimates – call (279) 300-1177.
Written by Trevor Nash, Owner at Penhallow Remodeling Sacramento, serving Sacramento since 2004.
What Our Customers Say
"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke
