Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Sacramento Owner’s Guide
KraftMaid kitchen remodeling in Sacramento typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop material, and whether we’re refacing what you have or gutting down to the studs. We stock KraftMaid-compatible hinges, drawer slides, door fronts, and trim pieces, and we can match most existing KraftMaid finishes within a week. Most owners call us after a door won’t close, a drawer binds, or a cabinet box has pulled away from the wall after years of Sacramento’s dry summers and damp winters doing their work on the wood.
Here’s the thing about KraftMaid cabinets: they’re well built, but they’re not indestructible. The two things that fail most often are the soft-close hinges, which lose their damping fluid, and the drawer glides, which wear out after roughly 10 to 15 years of daily use. We see it all across Sacramento, from Land Park colonials to newer builds in Natomas. If your cabinets are structurally sound, you don’t need a full remodel. You need the right parts, matched to the right series, installed by someone who knows KraftMaid’s quirks. That’s where we come in.
Key Takeaways:
- Installed KraftMaid kitchen remodeling in Sacramento: $14,000 – $45,000
- We match hinges, slides, and door fronts to your specific KraftMaid series
- Soft-close hinges and drawer glides are the most common failure points
- Every job gets a written price before we start and the 365-Day Done Right Promise in writing
Which KraftMaid Models This Applies To
KraftMaid has produced several cabinet lines over the years, and the parts are not all interchangeable. The main lines you’ll find in Sacramento homes are the standard KraftMaid line, KraftMaid Vantage (the mid-tier offering), and KraftMaid Momentum (the entry-level line carried by big-box retailers). Each series uses slightly different hinge mounting plates, and door sizes vary by up to 3/16 of an inch between lines.
Here’s the compatibility gotcha most people don’t know: KraftMaid changed their hinge boring pattern around 2012. If your cabinets were installed before that, the hinge cups are set at a different depth than current production. So you can’t just grab a hinge off the shelf and expect it to fit. We identify your exact model by checking the stamp on the inside of the cabinet box or the back of the door. From there, we match OEM KraftMaid parts where they’re still available. When OEM is discontinued, we use aftermarket equivalents that meet the same hinge bore and weight rating specifications.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors won’t close flush or stay closed – The soft-close hinge has lost its damping fluid, or the mounting plate has loosened from years of cabinet slab settling. The fix is usually a hinge replacement, not a new door.
- Drawers bind, stick, or drop – The nylon rollers inside the drawer glide have worn flat. Once those rollers go, the drawer rides on metal against metal and starts gouging the glide rail.
- Cabinet boxes pulling away from the wall – Sacramento’s soil expands and contracts with the seasons. We see upper cabinet boxes in older homes near the American River start to separate from their mounting rails after enough seasonal movement.
- Delaminated or bubbling door fronts – KraftMaid’s older foil-wrapped doors can start peeling after years of heat from ovens or direct afternoon sun through a west-facing window. This is cosmetic, but it spreads once it starts.
- Chewed-up corner posts or cracked face frames – Usually from impacts, but here’s the thing: once a face frame crack opens, it’s a humidity conduit. Sacramento’s wet winters will keep working that crack wider every year.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full KraftMaid kitchen remodel in Sacramento runs $14,000 – $45,000. That range covers everything from a modest galley kitchen refresh with stock cabinet boxes and laminate countertops up to a full custom layout with soft-close doors and drawers throughout, quartz counters, and a kitchen island. A smaller kitchen, say under 120 square feet, typically lands between $9,000 and $20,000.
If you’re replacing parts rather than the whole kitchen, individual hinge replacements run $8 – $25 per hinge installed, and drawer glide swaps run $35 – $85 per drawer, parts included. What drives the number: how many cabinets you have, whether we’re adding soft-close conversion or just restoring what’s there, and whether any cabinet boxes need shimming or remounting. Every quote is a written line-item price before we touch anything. No change orders, no surprise add-ons. And the work carries our 365-Day Done Right Promise: if something fails inside that year, we come back and make it right at no charge.
DIY or Call Us?
Some stuff you can safely do yourself. Cleaning out the drawer track and re-seating a hinge plate with a screwdriver? That’s fine, and it might buy you a few months. But adjusting KraftMaid soft-close hinges requires a specific depth setting on the hinge arm, and if you overtighten the mounting screws in a particleboard cabinet box, you’ll strip the bore and now you need a box repair too. We’ve fixed more DIY hinge jobs in Sacramento than we can count, and they usually cost double what the original repair would have.
Cabinet boxes pulling away from the wall are a different story. If an upper cabinet comes down, it’s heavy enough to hurt someone. Don’t mess with that. Call (279) 300-1177 and we’ll have a background-checked, uniformed technician out to look at it before you finish your coffee.
FAQs
KraftMaid cabinet boxes typically last 30 to 50 years when they stay dry. Soft-close hinges last 10 to 15 years. Sacramento’s climate, with its long dry summers and occasional damp winters, can shorten hinge life because the damping fluid thickens and thins with temperature shifts. Same thing happens to drawer glides. Call (279) 300-1177 if yours are making noise or binding, and we’ll tell you if it’s a part swap or something bigger. Estimates are free.
Yes, in most cases. Doors that won’t close, drawers that bind, and loose face frames are all repairable with the right parts. The exception is water damage. If a cabinet box under the sink has swollen particleboard, that box needs replacement, not a patch. We’ll tell you straight which side of the line you’re on when we look at it.
A full kitchen remodel takes 3 to 8 weeks from demo to final walkthrough, depending on scope and countertop fabrication time. A parts-only repair, like replacing all hinges and glides in a standard kitchen, is usually a one-day job. We give you a written schedule before we start, and we show up in the window we gave you.
We keep the most common KraftMaid hinge plates, soft-close hinges, and drawer glides stocked on the truck. For oddball sizes or discontinued finishes, we order direct from our supply partners and usually have the part in hand within a week. We also work with Cambria, Silestone, and Kohler products when your kitchen needs more than cabinet parts.
Ready to get your KraftMaid kitchen back in shape? Call Penhallow Remodeling Sacramento at (279) 300-1177. We’ll give you a written price before any work starts, show up when we say we will, and back the whole thing with our 365-Day Done Right Promise. Tell me what you want the room to feel like, and I’ll tell you what it actually takes to get there.
Written by Trevor Nash, Owner, Penhallow Remodeling Sacramento at Penhallow Remodeling Sacramento, serving Sacramento and nearby areas.
