Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sacramento Homeowners Choose KraftMaid Construction
We’re Penhallow Remodeling Sacramento, an independent General Contractor and kitchen remodeling crew serving Sacramento and the surrounding neighborhoods. KraftMaid cabinets are built in Ohio, but they live in Sacramento kitchens now, and that means dry summers, hard water, and a lot of daily use. We service and install the full KraftMaid line – Vantage, Benton, Durham, and Hadley included – and our techs know these cabinets well enough to fix the hinge before it takes the door frame with it. We are not affiliated with or authorized by KraftMaid. We’re an independent service provider, and that independence means we answer to you, not a manufacturer’s call center.
If you own KraftMaid cabinets in Sacramento and something is off – a door gap, a sticky drawer, a peeling edge – call us at (279) 300-1177. We’ll give you a straight answer about what’s wrong and what it costs to fix.
Why Trust Penhallow Remodeling Sacramento for Your KraftMaid Construction?
Trevor Nash runs our Sacramento operation, and he got his start in the trades at Los Angeles Trade-Technical College before spending nearly two decades swinging a hammer across Southern California. For the last several years, he and the crew have been doing honest remodeling work throughout Kraftmaid in Roseville and Sacramento – everything from kitchen gut-outs in East Sacramento to bathroom rebuilds near McKinley Park. Trevor prices a job straight the first time and stays on schedule without a lot of drama.
Our techs work on KraftMaid cabinetry every week. That’s not a marketing line – it’s what shows up in our trucks. KraftMaid uses a specific style of full-overlay hinge geometry on the Vantage line, and the Benton and Durham drawers rely on dovetail joinery that behaves predictably under load. If a hinge is sagging, we know whether the problem is the hinge itself, the door stile, or the mounting plate. If a drawer box has cracked, we can tell you whether the fix is glue and pin nails or a new box. That kind of familiarity comes from repetition, not from reading a spec sheet.
We stock genuine KraftMaid hinges, slides, and bumpers when our independent suppliers have them. When they don’t, we install premium aftermarket hardware from Blum or Grass, which is what most high-end cabinet manufacturers spec anyway. Every job gets a written price before we start, and every repair carries our 365-Day Done Right Promise. If the fix fails inside a year, we come back and make it right at no charge.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Sacramento
KraftMaid builds a solid cabinet, but no cabinet is immune to daily use, Kraftmaid in Sacramento‘s dry heat, or a teenager who treats a drawer like a step stool. These are the issues we see most often, by line:
- Vantage full-overlay hinge sag. Vantage doors hang on hidden cup hinges, and over time the hinge arm creeps downward. The door starts rubbing against its neighbor or the top of the frame, leaving a telltale wear mark. A 1/16-inch adjustment fixes most of these, but ignoring it for a year can oval out the screw holes and warp the door stile.
- Benton and Durham cracked dovetail joints. Both lines use dovetail joinery in the drawer boxes. They’re strong, but a loaded utensil drawer can develop hairline cracks at the front corners, especially if the drawer was ever overfilled or if somebody leaned on it while it was open. The drawer front separates from the sides, and you feel a wobble when you open it.
- Thermofoil peeling on lower-exposure doors. KraftMaid’s thermofoil doors – a vinyl laminate over MDF – hold up well in most climates, but Sacramento’s dry summer heat cycles can break down the adhesive bond along bottom edges. Add repeated wipe-downs with a damp rag, and the foil starts to lift at the corners. This gets worse the longer it goes, because the exposed MDF core pulls moisture from the air in winter.
- Hadley soft-close slide binding. Hadley drawers ride on soft-close undermount slides, and those slides collect dust, grease film, and pet hair. The grease in the slide turns to a paste, and the drawer stops closing unless you shove it. Cleaning and relubricating the slide usually brings it back, but a slide that’s been binding for months may already have a flat spot on the bearing race.
- Corner base cabinet door interference. KraftMaid’s corner base cabinets use a bifold or L-shaped door arrangement, and the self-close hinge on the smaller door wears out first. The door stops latching and rubs against the adjacent drawer front, which chips the finish on both pieces if left unaddressed.
KraftMaid Parts & Our Repair-vs-Replace Approach
We’ll always choose the genuine KraftMaid hinge, slide, or bumper when our Sacramento suppliers have it in stock. OEM parts mean the screw pattern matches, the finish matches, and the adjustment range matches. For older or discontinued KraftMaid models, we turn to Blum or Grass hardware – the same two companies KraftMaid has used in various production runs over the years. A Blum soft-close hinge on a KraftMaid Vantage door is a common retrofit, and it typically outlasts the original.
Repair versus replace is an honest conversation. A single cracked dovetail on a Benton drawer box is a $40 repair. Four cracked drawers in a 15-year-old kitchen with worn slides and chipped thermofoil doors is a different conversation. When repeated repairs on one cabinet add up to more than 60% of what a new box and front would cost, we’ll tell you that. We’d rather be the company that gave you the straight answer than the one that kept billing service calls. A homeowner in Land Park called us because their KraftMaid Benton corner base cabinet door wouldn’t stay closed – the original self-close hinge had worn out and the door was rubbing against the adjacent drawer front. Our tech swapped in a new Blum soft-close hinge, adjusted the door alignment with a 1/16-inch offset, and reinforced the drawer box dovetails with glue and pin nails. The final fit was flush, and the door now closes silently even when slammed.
Call (279) 300-1177 if you want a written estimate for a KraftMaid repair before committing to anything.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet, hinge, drawer, or face frame in your Sacramento kitchen. We check the door gaps, the slide action, the drawer box joinery, and the mounting hardware – and we tell you what we found in plain language. If the finish is peeling, we note how far it’s spread.
- 2
Repair or install. If the fix is mechanical – a hinge, a slide, a drawer box – we replace or reinforce it and adjust everything to a flush fit. If the job is new cabinet installation or refacing, we follow the same KraftMaid-specific assembly and alignment specs the factory lays out for Vantage, Benton, Durham, and Hadley.
- 3
Test. Every door is opened and closed a dozen times. Every drawer is pulled to full extension and shut softly. We check for rubbing, rattling, or binding, and we adjust until nothing moves that shouldn’t.
- 4
Warranty. Every repair and installation carries our 365-Day Done Right Promise in writing. If something fails inside a year, we make it right at no charge – no service call fee, no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Sacramento
We’re comfortable with the full KraftMaid lineup, including the ready-to-assemble Vantage series, the mid-range Benton and Durham lines, and the soft-close Hadley collection. We install new cabinets, reface existing ones, and add matching islands or pantry walls. Our Sacramento suppliers keep us stocked with common KraftMaid hinge plates, mounting screws, soft-close adapters, and drawer glide replacements, so most hardware repairs are one visit, not a wait-for-parts situation.
We Also Service These Brands
KraftMaid is a big part of our week, but it’s not the only part. We also install and work with Cambria and Silestone countertops, Kohler and Toto fixtures, and Wellborn cabinetry. If your Sacramento kitchen pulls from several brands, we’re equipped to handle the whole room as one project.
FAQs – KraftMaid Construction Service in Sacramento
Yes. A single drawer box on a KraftMaid Benton or Durham cabinet can usually be repaired or replaced without touching the surrounding cabinets. If the dovetails are cracked but the front is intact, we glue and pin the box, then reinstall the drawer front. If the box is too far gone, we order a matching replacement box and reuse your existing front and hardware. You don’t need to lose the cabinet or the run. Call (279) 300-1177 for an exact quote on your drawer.
Yes, we service and install Vantage. RTA cabinets are assembled on-site from flat-packed panels, and the trick is knowing how much glue to apply, how to clamp the face frame square, and whether to add reinforcement before the cabinet goes in. A poorly assembled Vantage box will twist over time in Kraftmaid repair in Folsom and Sacramento’s dry heat, but a properly built one holds up just as well as a factory-assembled Benton. We handle both assembly and repair.
Sometimes. If the peel is small and the MDF core underneath is dry and intact, we can often re-bond the foil edge with a heat gun and contact adhesive, then touch up the seam. If the peeling has spread over more than a few inches or the MDF has started to swell, the door is a loss – and the honest answer is a replacement door, not a patch. We’ll show you the damage and let you decide. Call (279) 300-1177 and we’ll walk you through it.
Matching starts with the door style and the finish code. KraftMaid stamps a production date and finish code on the inside of most drawer boxes, which tells us the exact door profile and stain or paint color. We can order the matching door style and blend the new finish to your existing cabinets. A note: sunlight fades cabinet finishes, so an exact match on a 10-year-old kitchen may not be possible – but we’ll get it close enough that the difference only shows under a flashlight.
Both. We do full kitchen remodeling, which includes moving walls, reworking plumbing and electrical, and changing the layout. We also do cabinet-only swaps where the footprint stays the same. If you want to go from a U-shaped kitchen to an island layout with KraftMaid Hadley cabinets, we’ll handle the design, demo, and install as one job. Kitchen remodels in Sacramento typically run $14,000 – $45,000 depending on the cabinet line, countertop material, and how much of the layout changes.
Here’s what you can expect in Sacramento for KraftMaid-specific work.
| Service | Typical Cost Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing | $5,000 – $15,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Kitchen Design & Layout | $800 – $3,000 |
Call (279) 300-1177 for a written line-item quote on your KraftMaid project. It’s free, and the number on the estimate is the number on the invoice.
Book Your KraftMaid Service in Sacramento, CA
Tell me what you want the room to feel like, and I’ll tell you what it actually takes to get there. If your KraftMaid cabinets need a hinge, a drawer box, a reface, or a full kitchen remodel in Sacramento, call (279) 300-1177. Trevor Nash and the Penhallow crew will give you a written price before any work starts and a 365-day guarantee in writing. That’s what we do – no drama, no runaround.
Written by Trevor Nash, Owner at Penhallow Remodeling Sacramento, serving Sacramento since the Kingswell Guarantee took root in 2004.
