Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Sacramento Owner’s Guide
If you have a Tremron bathroom surface that’s failed or failing, we match it, replace it, and stand behind the work in writing. Tremron bathroom remodeling in Sacramento typically runs $9,000 – $28,000 installed, depending on the scope of the rebuild, the materials you choose, and what’s behind the existing surface once we open it up. Most homeowners discover a problem the same way: a crack that wasn’t there last month, a grout line that keeps darkening no matter how often you scrub it, or a soft spot that flexes when you step on it.
We’re an independent Sacramento remodeling contractor. We’re not affiliated with Tremron, but we work with their products regularly and know what it takes to tear out a failed install and rebuild it so it stays put.
Which Tremron Models This Applies To
Tremron makes concrete paver and wall products, and in bathroom settings, their materials typically show up as shower floors, bathroom floors, accent walls, and occasionally vanity surrounds. The compatibility question that matters isn’t the model name stamped on the crate. It’s the thickness, the finish, and the substrate it was set on. A 1-1/4″ paver behaves differently than a 3/4″ tile-format piece, and a paver set over a mud bed is a different situation than one set over plywood with a thin bonding layer. If you still have the original order paperwork, look for the product code, which is usually a letter-and-number format printed on the delivery slip rather than the paver itself. If you don’t have it, we measure the exposed edge and identify the series from there.
One compatibility gotcha we run into in Sacramento: Tremron produces a few paver lines with slightly different color-lot variation, so matching a single replacement paver is rarely exact. If the goal is a seamless repair, we usually recommend replacing the full visible section rather than one piece. OEM Tremron is the right choice when you care about an exact match on a newer install. For older products, a quality aftermarket equivalent can work, but we’ll tell you honestly before you spend the money which route makes sense.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Hairline cracks running through multiple pavers. This usually means movement beneath the surface. In Sacramento, clay soil expands and contracts with the wet-dry cycle, and a slab that shifts will telegraph cracks straight through the pavers above it.
- Hollow-sounding spots when you tap the floor. That’s delamination: the paver has separated from the setting bed. It generally means the original install used the wrong bonding material or the surface wasn’t prepped correctly.
- Grout that stays dark or keeps crumbling. Persistent moisture behind the grout points to failed waterproofing underneath. Not a cosmetic issue. It needs to be opened up and inspected.
- Efflorescence that won’t stop coming back. The white powdery mineral deposits mean water is moving through the paver surface. A sealer helps temporarily, but the water source has to be addressed.
- Visible lippage between adjacent pavers. If one paver sits higher than its neighbor and you can catch a toe on it, the setting bed is settling unevenly. That’s a trip hazard and a sign of a deeper installation problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Tremron bathroom floor or shower rebuild in Sacramento runs $9,000 – $28,000. The range exists because no two failures are identical. A small bathroom floor replacement with standard Tremron pavers and a straightforward tear-out will land closer to $9,000. A full shower rebuild with a new waterproofing system, new drain assembly, and custom paver layout can push toward $28,000.
Here’s what drives the number up or down:
- Square footage of the failed surface
- Whether the substrate underneath needs to be replaced
- Whether waterproofing has to be redone from scratch
- Paver thickness and finish you’re installing
- Whether the drain needs to be relocated
- Access issues: second-story bathrooms, tight hallways, and older homes with structural surprises cost more in labor
You get a written price before we start. The number on that sheet is the number on the invoice. If the substrate is worse than expected, we stop and talk to you before any change is made. Every Tremron replacement we do includes our 365-Day Done Right Promise in writing: if the work fails inside a year, we come back and fix it at no charge. No re-inspection fee, no service call.
DIY or Call Us?
What you can safely do yourself: photograph the damage, map out the cracked or hollow areas with painter’s tape, and keep foot traffic off the affected section. That’s a genuine help to us, and it costs you nothing.
What you shouldn’t attempt: tearing out bathroom flooring without knowing what’s underneath. Sacramento homes built before the late 1980s often have concrete floors with older waterproofing methods, and some have asbestos-containing mastics under the surface. Breaking into that without testing is a serious health risk. The same goes for shower pans: cutting into the wrong layer compromises the waterproofing and turns a $9,000 repair into a $28,000 rebuild. If you’ve got a cracked Tremron surface, call us at (279) 300-1177. We’ll tell you whether it’s a simple swap or a full teardown before you spend a dollar.
FAQs
Properly installed over a stable substrate with correct waterproofing, Tremron bathroom pavers should last 25 – 30 years or more. The Sacramento climate shortens that when the install was done over shifting clay without adequate base prep, or when water has been getting behind the surface for years. Most failures we see are installation failures, not product failures.
Sometimes we can do a sectional replacement: removing the failed pavers, correcting the substrate issue, and re-setting new material. But if the cracking is widespread or the waterproofing is compromised, a partial repair just moves the problem six months down the road. We’ll give you a straight answer once we open it up, and you’ll have a written price either way. Call (279) 300-1177 to schedule a free estimate.
A straightforward bathroom floor replacement typically takes 3 – 5 working days. A full shower rebuild with waterproofing and custom paver work usually runs 7 – 10 working days. Before we start, you get a written schedule with a defined arrival window, not a vague “sometime next week.”
We source Tremron materials through local Sacramento suppliers and can usually have the right product on site within 3 – 5 business days. We also stock compatible setting materials, waterproofing systems, and grouts on our trucks, supplied through the same trade channels we use for KraftMaid cabinetry, Cambria quartz, and Silestone surfaces.
Tell me what you want the room to feel like, and I’ll tell you what it actually takes to get there.
If your Tremron bathroom surface is cracking, hollow, or letting water through, call (279) 300-1177 for a free estimate from Penhallow Remodeling Sacramento. We’ll inspect it, give you a written price, and if you hire us, we’ll put the guarantee in writing before a single paver comes up.
Written by Trevor Nash, Owner, Penhallow Remodeling Sacramento at Penhallow Remodeling Sacramento, serving Sacramento and nearby areas.
